The fuel dosing feeder mod. DT is designed for weighing a predetermined portion of fuel and unloading it uniformly onto the conveyer feeding the charge to the skip hoist. The dosing feeder consists of hopper 1 resting with its four rubber shock absorbers 2 on weigh beam 3. The weigh beam in its turn is supported by two bearing units 4 secured with rubber gaskets 5 to frame 6. The bottom section of the hopper is fitted with vibrating chute 7 with vibrator 8 secured to its back wall. At the outlet of the vibrating shute there is rubber blind 9 to prevent fuel from pouring out when taking a portion.

In the starting position the weight of the empty hopper is balanced by a counterweight placed in tank 10. The vibrating chute may be installed along or across the dosing feeder axis.

htpn5

TECHINAL DATA:
Overall dimensions, mm:
length                 2,350
width                  760
height                 800
Weight, kg          220
Material: steel AISI304

Techinservice MG also provides customized installation, start-up & commissioning and automation services for all types of equipment for lime sections of sugar refineries in accordance with technical requirements of our Clients.